Посібник Alecto ADB-19 Дверний дзвінок

Посібник

ADB-19 Installation

Outdoor-unit:

Indoor-unit:

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

Connecting:

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

1

Accessories List:

● 1 x Receiver ● 1 x Transmitter

● 1 x User Manual ● 1 x Double-sided adhesive

● 1 x 3 volts CR2032 battery for transmitter

Technical Specification:

● Frequency: 433.92MHz+100KHz

● Modulation Type: ASK

● Ring Volume:＞85dB(within 0.5m)

● Channel space: 1 million sets of auto-learning codes

● Receiver bandwidth: ±90KHz

● Reception Sensitivity:＞-105dBm

● Transmitter Power:＜10mW

● Power consumption(Receiver): standby:＜0.3W

● Power consumption(Transmitter): standby:＜5uA working:＜10mA

● Power Supply(Receiver): AC110-240V

● Power Supply(Transmitter): DC 3V (1x CR2032)

● Operating Range:＞150m (in the open air)

Names for Parts:

Instruction Manual

Auto-leaning Code Wireless Door Chime

Model No.: QH-861AK

VOL

MODE

CODE

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

1x1x

1x

<10 sec.

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

Important Note:

● If you do not plan to use the device for a long time, such as at a vacation, please remove the

battery from Transmitter, then put them in a safe place.

● Improperly using a battery may cause it to leak and damage nearby items, and can create the

risk of fire and personal injury. Batteries should not be left in an area where the children can

reach them as they may pose a chocking hazard.

● Recycle used batteries following environmental protection practices.

Transmitter Installation:

● Stick the Transmitter on the wall or the door with

double-sided adhesive tape.

Receiver Installation:

● Plug the Receiver into any socket of AC110~240V power.

2

Battery Installation (Transmitter):

Transmitter uses a 3V CR2032 battery (included).

Open the Transmitter (by pushing in the interface located at the bottom with a flat screw driver)

and place the battery. Please be well noted with the correct battery polarity. To replace a new

battery, operate in the same way.

Press lightly the battery

holder at side

CR2032 3V Lithium Battery

1

Accessories List:

● 1 x Receiver ● 1 x Transmitter

● 1 x User Manual ● 1 x Double-sided adhesive

● 1 x 3 volts CR2032 battery for transmitter

Technical Specification:

● Frequency: 433.92MHz+100KHz

● Modulation Type: ASK

● Ring Volume:＞85dB(within 0.5m)

● Channel space: 1 million sets of auto-learning codes

● Receiver bandwidth: ±90KHz

● Reception Sensitivity:＞-105dBm

● Transmitter Power:＜10mW

● Power consumption(Receiver): standby:＜0.3W

● Power consumption(Transmitter): standby:＜5uA working:＜10mA

● Power Supply(Receiver): AC110-240V

● Power Supply(Transmitter): DC 3V (1x CR2032)

● Operating Range:＞150m (in the open air)

Names for Parts:

Instruction Manual

Auto-leaning Code Wireless Door Chime

Model No.: QH-861AK

VOL

MODE

CODE

1x

Рейтинг

Детальніше про цей посібник

Ми розуміємо, що добре мати паперовий посібник для вашого Alecto ADB-19 Дверний дзвінок. Ви завжди можете завантажити посібник з нашого сайту та роздрукувати самостійно. Якщо ви бажаєте отримати оригінальний посібник, радимо зв’язатися з Alecto. Вони можуть надати оригінальний посібник. Шукаєте інструкцію до свого Alecto ADB-19 Дверний дзвінок іншою мовою? Виберіть потрібну мову на нашій домашній сторінці та знайдіть номер моделі, щоб дізнатися, чи є вона у нас.

Технічні характеристики

Усі посібники для Alecto Дверні дзвінки
Більше посібників для Дверні дзвінки

Супутні товари

Посібник

Elro DB290 Дверний дзвінок

Посібник

Elro DB260F Дверний дзвінок

Посібник

Elro DB200 Дверний дзвінок

Посібник

Elro DB250 Дверний дзвінок

Посібник

Trust 71081 Дверний дзвінок

Посібник

Fysic FD-35 Дверний дзвінок

Посібник

Elro DB101 Дверний дзвінок

Посібник

Elro DB260 Дверний дзвінок

Пов'язані категорії