Посібник Panasonic ES-8043 Бритва

Посібник

8

The battery capacity monitor will all

illuminate and the charge status lamp

will blink after charging is completed

(see fig. 2 (A)).

10 minutes after charging is com-

pleted, the battery capacity monitor

will extinguish and the charge status

lamp will continue to blink (see fig. 2

(B)).

You can fully charge the shaver in 1

hour if the LED display shows “low”

(low).

The battery capacity monitor indi-

cates the charge remaining in the

battery in 3 levels (high/mid/low). The

unit can be used once or twice more

after the “low” (low) starts to blink.

(Differs depending on the use situa-

tion.)

[for ES8043]

The charge status lamp will glow

when the shaver is being charged. It

will blink when the charging is com-

pleted (see fig. 2 (D)).

You can fully charge the shaver in 1

hour if the low battery indicator blinks

(see fig. 2 (C)).

The unit can be used once or twice

more after the low battery indicator

starts to blink.

A full charge will supply enough

power for approx. 14 shaves (3 min-

utes per shave for a normal beard).

Before travelling, charge it fully for 1

hour if you will not be taking the adap-

tor with you.

In case your shaver is without charge,

you may quick charge it for 1 shave

in about 5 minutes.

Charge with charging

stand

(see fig. 1 (B))

To charge with the charging stand,

connect the power cord to the charg-

ing stand. Place the shaver into the

stand, and plug the adaptor to the

AC outlet.

You can always store your shaver in

the charging stand to maintain full

battery capacity. This shaver cannot

be overcharged.

Using your shaver

Caution – The system outer foil is

very thin and can be damaged if

handled improperly. Before each

use, always check the foil for dam-

age. To avoid personal injury, do

not use if the foil or other parts of

the shaving head is damaged.

Disconnect the power cord from the

shaver, and push the On/Off switch

to turn the shaver on.

If you push and hold the On/Off

switch for more than 2 seconds, it

will activate the turbo mode for

“sonic” vibration cleaning.

(see “Cleaning your shaver”)

Caution:

Shaving with “sonic” vibration may

damage your skin. Please turn it

off and on again to deactivate the

turbo mode.

9

Do not place fingers on the On/Off

switch during use.

This may cause the shaver to stop

during use or change it to the

“sonic” vibration cleaning mode.

Place your finger on the finger rest

during use.

Hold the shaver at a right angle (90°)

to your skin (see fig. 3). Start out

shaving by applying gentle pressure

to your face. Stretch your skin with

your free hand and move the shaver

back and forth in the direction of your

beard. You may gently increase the

amount of pressure as your skin be-

comes accustomed to this shaver.

Applying excessive pressure does

not provide a closer shave.

Pivot action selector

(see fig. 4)

Use the pivot action selector to

choose the shaving mode, “soft”

(soft) and “lock” (lock) based on your

shaving preference.

The pivot action can be changed

whether the switch is turned on or off.

System outer foil

(see fig. 5)

System outer foil has a slit blade (a)

between 2 foils (b). They move up

and down independently to follow the

contours of your face.

The slit blade catches and cuts

longer and lying hairs easily.

For wet shaving

Put a thin layer of shaving foam on

your face which works as a lubrica-

tor. Shaving foam is the most suit-

able among many other shaving aids

(gel, soap, cream, etc.). Do not put a

thick layer of shaving foam as it may

affect shaver’s performance. If the

shaving head is clogged with foam,

simply rinse it under running water.

Using the trimmer

(see fig. 6)

Slide the trimmer handle up to open

the trimmer.

Place the trimmer at a right angle to

your skin and move it downward to

trim sideburns.

Cleaning your shaver

(see fig. 7)

Warning – To prevent electric

shock or personal injury, discon-

nect the power cord from the

shaver before cleaning with water.

For cleanliness and convenience, we

recommend that you clean your

shaver with water and a liquid hand

soap. Regular cleaning will keep your

shaver in good condition while pre-

venting odors or bacteria from devel-

oping, and maintain the cutting per-

formance.

With the system outer foil in place,

apply some hand soap onto the outer

foil.

Push and hold the On/Off switch

more than 2 seconds to activate the

turbo mode for “sonic” vibration

cleaning.

At the same time, the lamps of the

Battery capacity monitor (ES8044) or

Low battery indicator/Charge status

lamp (ES8043) will flash around ran-

domly.

76

P006-039̲ES8044̲43̲EU  05.2.21 11:15  ページ6

Рейтинг

Детальніше про цей посібник

Ми розуміємо, що добре мати паперовий посібник для вашого Panasonic ES-8043 Бритва. Ви завжди можете завантажити посібник з нашого сайту та роздрукувати самостійно. Якщо ви бажаєте отримати оригінальний посібник, радимо зв’язатися з Panasonic. Вони можуть надати оригінальний посібник. Шукаєте інструкцію до свого Panasonic ES-8043 Бритва іншою мовою? Виберіть потрібну мову на нашій домашній сторінці та знайдіть номер моделі, щоб дізнатися, чи є вона у нас.

Технічні характеристики

Усі посібники для Panasonic Бритви
Більше посібників для Бритви

Часті запитання про Panasonic ES-8043 Бритва

Наша служба підтримки шукає корисну інформацію про товар і відповідає на поширені запитання. Якщо ви знайдете неточність у наших запитаннях та відповідях, повідомте нас про це, скориставшись контактною формою.

Супутні товари

Посібник

Panasonic ES-7036 Бритва

Посібник

Panasonic ES-8163 Бритва

Посібник

Panasonic ES-6003 Бритва

Посібник

Panasonic ES8249 Бритва

Посібник

Panasonic ES-4033 Бритва

Посібник

Panasonic ES-6003E8 Бритва

Посібник

Panasonic ES-7109 Бритва

Посібник

Panasonic ES-7038 Бритва

Пов'язані категорії