Посібник Philips HR7762 Viva Collection Кухонний комбайн

Посібник

English

1 Important

Congratulations on your purchase and welcome to Philips! To fully benet from the support

that Philips offers, register your product at www.philips.com/welcome.

Read this user manual carefully before you use the appliance, and save the user manual

forfuture reference.”

Danger

• Do not immerse the motor unit in water nor rinse

it under the tap.

Warning

• Never use your ngers or an object to push

ingredients into the feeding tube while the appliance

is running. Only use the pusher.

• Before you connect the appliance to the power,

make sure that the voltage indicated on the bottom

of the appliance corresponds to the local power

voltage.

• Never connect this appliance to a timer switch, to

avoid a hazardous situation.

• Do not use the appliance if the power cord, the

plug, protecting cover, rotating sieve or any other

parts are damaged or has visible cracks.

• If the power cord is damaged, you must have it

replaced by Philips, a service center authorized

by Philips, or similarly qualied persons to avoid a

hazard.

• This appliance shall not be used by children. Keep

the appliance and its cord out of reach of children.

• This appliance can be used by persons with reduced

physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given

supervision or instruction concerning use of the

appliance in a safe way and if they understand the

hazards involved.

• For their safety, do not allow children to play with

the appliance.

• Never let the appliance run unattended.

• If food sticks to the wall of the blender jar or bowl,

switch off the appliance and unplug it. Then use a

spatula to remove the food from the wall.

• Be careful when you are emptying the bowl, handle

or clean the discs, the blade units and the juicer

sieve. The cutting edges are very sharp.

• Do not touch the blades, especially when the

appliance is plugged in. The blades are very sharp.

• If the blades get stuck, unplug the appliance before

you remove the ingredients that block the blades.

• Be careful if hot liquid is poured into the food

processor or blender as it can be ejected out of the

appliance due to a sudden steaming.

• This appliance is intended for household use only.

Caution

• Never switch off the appliance by turning the

blender jar, the bowl, or their lids. Always switch off

the appliance by turning the speed selector to 0 or

OFF.

• Unplug the appliance immediately after use.

• Always wait until the moving parts stop running,

then switch off and unplug the appliance before

opening the lid and reaching into any of the parts

that move in use.

• Always switch off and unplug the appliance if it is left

unattended, and before assembling, disassembling,

cleaning and changing accessories, or approaching

parts that move in use.

• Thoroughly clean the parts that come into contact

with food before you use the appliance for the rst

time. Refer to the instructions and table for cleaning

given in this manual.

• Never use any accessories or parts from other

manufacturers that Philips does not specically

recommend. If you use such accessories or parts,

your guarantee becomes invalid.

• Do not exceed the maximum level indication on

the bowl or the jar. Follow the quantities, processing

time and speed as indicated in the user manual.

• Let hot ingredients cool down (< 80ºC) before

processing them.

• Always let the appliance cool down to room

temperature after each batch that you process.

• Certain ingredients such as carrots may cause

discolorations on the surface of the parts. This

does not have a negative effect on the parts. The

discolorations usually disappear after some time.

• Noise level: Lc = 78 dB [A]

Electromagneticelds(EMF)

This Philips appliance complies with all applicable standards and regulations regarding

exposure to electromagnetic elds (EMF). If handled properly and according to the

instructions in this user manual, the appliance is safe to use based on scientic evidence

available today.

Recycling

Your product is designed and manufactured with high quality materials and

components, which can be recycled and reused.

When you see the crossed-out wheel bin symbol attached to a product, it means

the product is covered by the European Directive 2002/96/EC:

Never dispose of your product with other household waste. Please inform yourself

about the local rules on the separate collection of electrical and electronic products.

The correct disposal of your old product helps prevent potentially negative

consequences on the environment and human health.

2 Introduction

Congratulations on your purchase and welcome to Philips! To fully benet from the support

that Philips offers, register your product at www.philips.com/welcome.

This appliance is equipped with a built-in safety lock. You can only switch on the appliance

after you correctly assemble the following parts on the motor unit:

• the food processor bowl and its lid, or

• the blender jar and its lid, or

• the mini chopper.

If these parts are assembled correctly, the built-in safety lock is unlocked.

For recipes, go to www.philips.com/kitchen

3 Foodprocessor

Blade unit

Before you start, make sure that you assemble according to Fig. 2.

You can use the blade unit to chop, mix, blend, or puree ingredients.

Caution

•

Do not use the blade unit to chop hard ingredients, like coffee beans, turmeric, nutmeg, and ice

cubes, as this may cause the blade to get blunt.

Note

•

Do not let the appliance run too long when you chop (hard) cheese or chocolate. Otherwise these

ingredients become too hot, start to melt, and turn lumpy.

• Precut large pieces of food into pieces of approx. 3 x 3 x 3 cm.

1 Turn the bowl clockwise to x it on the motor unit, and then put the shaft in the bowl.

» When the bowl is xed correctly, you hear a click.

2 Take the blade unit out of the protective cover.

3 Put the blade unit on the shaft.

4 Put the ingredients in the bowl.

5 Put the lid on the bowl, and then turn the lid clockwise to x it.

» When the lid is assembled correctly, you hear a click and the lid is xed to the

bowl handle.

6 Put the pusher into the feeding tube.

7 Connect the power plug to the power supply.

8 Select the speed that matches the color of the accessory - speed 1.

9 After use, turn the speed selector to 0, and then unplug the appliance.

Tip

•

When you chop onions, turn the speed selector to P a few times to prevent the onions from

becoming too nely chopped.

• How to remove food that sticks to the blade or to the inside of the bowl? 1. Switch off the appliance,

and then unplug it. 2. Remove the lid from the bowl. 3. Remove the ingredients from the blade or

from the side of the bowl with a spatula.

Kneading accessory

Before you start, make sure that you assemble according to Fig. 3.

You can use the kneading accessory to knead yeast dough for bread and pizzas. You need to

adjust the amount of liquid to form the dough according to the humidity and temperature

condition.

1 Turn the bowl clockwise to x it on the motor unit, and then put the shaft in the bowl.

» When the bowl is xed correctly, you hear a click.

2 Put the kneading accessory on the shaft.

3 Put the ingredients in the bowl.

4 Put the lid on the bowl, and then turn the lid clockwise to x it.

» When the lid is assembled correctly, you hear a click and the lid is xed to the

bowl handle.

5 Connect the power plug to the power supply.

6 Select the speed that matches the color of the accessory - speed 1.

• Depending on the recipe, pour liquid ingredient into the feeding tube while the

device is turned on.

7 After use, turn the speed selector to 0, and then unplug the appliance.

Discs and Inserts

Before you start, make sure that you pick your desired disc from following and assemble

according to Fig. 4 and Fig. 5:

• Emulsifying disc

• Reversible slicing / shredding disc (ne) (HR7762 and HR7763 only)

• Reversible slicing / shredding disc (coarse) (HR7762 and HR7763 only)

• French fry disc (HR7762 and HR7763 only)

• Granulating disc (HR7762 only)

• Julienne disc (HR7763 only)

Caution

•

Be careful when you handle the slicing blade of disc. It has a very sharp cutting edge.

• Never use the disc to process hard ingredients, like ice cubes.

• Do not exert too much pressure on the pusher when you press ingredients into the feed tube.

1 Turn the bowl clockwise to x it on the motor unit, and then put the shaft in the bowl.

» When the bowl is xed correctly, you hear a click.

2 Put the disc on the shaft. For inserts (HR7761 only), place an insert in the insert holder

as indicated below, then place the insert holder with insert on the shaft.

Place the opening of the insert over the shaft of the insert holder.

Push the opening of the insert over the projection on the shaft.

Press the insert onto the insert holder until it locks in position with a click.

3 Put the lid on the bowl, and then turn the lid clockwise to x it.

» When the lid is assembled correctly, you hear a click and the lid is xed to the

bowl handle.

4 Put the ingredients into the feeding tube with the pusher. Fill the feeding tube evenly for

the best results. When you have to process a large amount of ingredients, process small

batches and empty the bowl between batches.

5 Connect the power plug to the power supply.

6 Check the preparation time, the maximum amount and the speed setting required for

the ingredients in Table 1. Select the speed that matches the color of the accessory.

7 After use, turn the speed selector to 0, and then unplug the appliance.

4 Minichopper

Before you start, make sure you assemble according to Fig. 6.

Caution

•

Do not use the mini chopper to chop hard ingredients, like nutmeg, Chinese rock sugar, or ice cubes.

• Never use the mini chopper for more than 30 seconds without interruption.

• Assemble the sealing ring onto the blade unit before you attach the blade unit to the mini chopper,

to avoid leakage.

• Always process cloves, star anise, and aniseed together. If processed separately, these ingredients may

attack the plastic materials of the appliance.

• The mini chopper beaker may become discolored when you use the mill to process ingredients, like

cloves, anise, and cinnamon.

• Do not use the mini chopper to process liquids like fruit juice.

• Let hot ingredients cool down (< 80ºC) before processing them.

1 Put the ingredients in the mini chopper beaker within the maximum indication.

2 Turn the blade unit anticlockwise on the mini chopper beaker until it is xed properly.

3 Turn the mini chopper clockwise onto the motor unit until you hear a click.

4 Connect the power plug to the power supply.

5 Select the speed that matches the color of the accessory - speed 2. Let it run for about

10-30 seconds until the ingredients are ne enough.

6 After use, turn the speed selector to 0, and then unplug the appliance.

7 Turn the mini chopper anticlockwise to take it off from the motor unit.

8 Turn the blade unit clockwise to take it off from the mini chopper beaker.

Tip

•

For best results when processing beef, please use refrigerated beef cubes.

• How to remove the ingredients that stick to the side of the mini chopper? 1. Switch off the appliance,

and then unplug it. 2. Remove the beaker from the blade unit. 3. Remove the ingredients from the

blade or from the side of the beaker with a spoon.

5 Blender

Before you start, make sure you assemble according to Fig. 7.

The blender is intended for:

• Blending uids, like dairy products, sauces, fruit juices, soups, mixed drinks, and shakes,

• Mixing soft ingredients, like pancake batter,

• Pureeing cooked ingredients, like baby food.

Note

•

Do not exert too much pressure on the handle of the blender jar.

• Never open the lid to put your hand or any object in the jar while the blender is running.

• Always assemble the sealing ring onto the blade unit before you attach the blade unit to the blender

jar.

• To add liquid ingredients during processing, pour them into the blender jar through the feeding hole.

• Precut solid ingredients into small pieces before you process them.

• If you want to prepare a large quantity, process small batches of ingredients instead of a large

quantity at once.

• Use cooked ingredients when you blend a soup.

• To avoid spillage: When you process a liquid that is hot or tends to foam (for example, milk), do not

put more than 1 liter of liquid in the blender jar.

• If you are not satised with the result, switch off the appliance and stir the ingredients with a spatula.

Remove some of the contents to process a smaller quantity or add some liquid.

1 Turn the blade unit on the blender jar.

2 Place the blender jar on the motor unit and turn it clockwise to x it.

» When the jar is xed correctly, you hear a click.

3 Put the ingredients in the blender jar within the maximum level indication.

4 Place the lid on the blender jar, and then turn it clockwise to x it.

5 Connect the power plug to the power supply.

6 Select the speed that matches the color of the accessory - speed 2.

7 After use, turn the speed selector to 0, and unplug the appliance.

Tip

•

How to remove the ingredients that stick to the side of the blender jar? 1. Switch off the appliance,

and then unplug it. 2. Open the lid, and then use a spatula to remove the ingredients from the side of

the jar. 3. Keep the spatula at least 2 cm from the blade.

6 Cleaning and storage

Caution

•

Before you clean the appliance, unplug it.

• Make sure that the cutting edges of the blades, discs, and the inserts do not come into contact with

hard objects. This may cause the blade to get blunt.

• The cutting edges are sharp. Be careful when you clean.

1 Clean the motor unit with a moist cloth.

2 Clean the other parts in hot water (< 60ºC) with some washing-up liquid or in a

dishwasher.

3 Store the product in a dry place.

Рейтинг

Детальніше про цей посібник

Ми розуміємо, що добре мати паперовий посібник для вашого Philips HR7762 Viva Collection Кухонний комбайн. Ви завжди можете завантажити посібник з нашого сайту та роздрукувати самостійно. Якщо ви бажаєте отримати оригінальний посібник, радимо зв’язатися з Philips. Вони можуть надати оригінальний посібник. Шукаєте інструкцію до свого Philips HR7762 Viva Collection Кухонний комбайн іншою мовою? Виберіть потрібну мову на нашій домашній сторінці та знайдіть номер моделі, щоб дізнатися, чи є вона у нас.

Технічні характеристики

Усі посібники для Philips Кухонні комбайни
Більше посібників для Кухонні комбайни

Часті запитання про Philips HR7762 Viva Collection Кухонний комбайн

Наша служба підтримки шукає корисну інформацію про товар і відповідає на поширені запитання. Якщо ви знайдете неточність у наших запитаннях та відповідях, повідомте нас про це, скориставшись контактною формою.

Супутні товари

Посібник

Philips HR7735 Кухонний комбайн

Посібник

Philips HR7520 Кухонний комбайн

Посібник

Philips HR7974 Avance Collection Кухонний комбайн

Посібник

Philips HR7958 Avance Collection Кухонний комбайн

Посібник

Philips HR7605 Кухонний комбайн

Посібник

Philips HR1387 SaladMaker Кухонний комбайн

Посібник

Philips HR7530 Кухонний комбайн

Посібник

Philips HR7782 Кухонний комбайн

Пов'язані категорії