4
3. Close supervision is necessary when
any appliance is used by or near chil-
dren.
4. Unplug from outlet when not in use,
before putting on or taking off parts,
and before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a
damaged cord or plug or after the appli-
ance malfunctions, or is dropped or
damaged in any manner. Return appli-
ance to the nearest authorized service
facility for examination, repair, or elec-
trical or mechanical adjustment.
7. The use of attachments, including
canning or ordinary jars and processing
assembly not recommended by may
cause a risk of injury to persons.
8. Blades are sharp. Handle carefully.
9. Screw on container bottom firmly.
Injury can result if moving blades acci-
dentally become exposed.
10. Always operate blender with cover
in place.
11. Always hold jar while processing. If
the container should turn when the mo-
tor is switched ON, switch OFF immedi-
ately and tighten jar in threaded con-
tainer bottom.
12. When blending hot liquids, remove
the feeder cap from the two-piece cov-
er. Do not fill blender container beyond
the four cup level. Always begin pro-
cessing at the lowest speed setting.
13. Do not blend hot liquids in “MINI-
BLENDER” containers.
14. Do not use outdoors.
15. Do not let cord hang over edge of
table or counter, or touch hot surfaces.
16. Do not leave blender unattended
while it is operating.
SAVE THESE INSTRUCTIONS
KNOW YOUR BLENDER
This blender is designed for house-
hold use only.
COVER
The cover for your blender consists of
two parts, the plastic feeder cap (1) and
the vinyl cover (2). The cover is self-
sealing, and is made of vinyl which is
resistant to absorption of odours and
stains. The feeder cap is removable for
use as a measuring cap and provides
and opening for the addition of other
ingredients.
CONTAINER
The 5-cup (1.25 liter) container (3) for
the blender is graduated for easy meas-
urement and is molded of heat and cold
resistant material. The convenient han-
dle and pouring lid permit easy removal
of liquid mixtures while thicker mixtures
are more easily removed through the
bottom opening.
PROCESSING ASSEMBLY
Consists of three parts: (4) as a sealing
ring used as a cushion between the con-
tainer and the agitator; (5) agitator of
high-grade stainless steel; (6) a thread-
ed container bottom.
MOTOR AND MOTOR BASE
The powerful three-speed motor is the
heart of the appliance and is designed
just for this unit. It is completely en-
closed within the housing (7). The mo-
tor uses a “free-floating” feature to re-
duce noise and wear. The powerful food
processing motor can be overloaded. To
5
avoid this possibility, closely follow the
instructions and the quantities recom-
mendations in this book.
CARE AND CLEANING OF YOUR
BLENDER
Blender container parts are corrosion
resistant, sanitary and easily cleaned.
Before first use and after every use,
separate container parts (items 1-6)
and clean thoroughly in warm, soapy
water, then rinse and dry well. DO NOT
WASH ANY PARTS IN AN AUTOMATIC
DISHWASHER. Periodically check all
parts before reassembly. If the pro-
cessing blades are stuck or difficult to
turn, DO NOT USE BLENDER. Check by
carefully turning the blades in a coun-
terclockwise direction (opposite edges
are sharp). Blades should turn freely.
If the glass container is chipped or
cracked, DO NOT USE BLENDER. Further
use could result in the container break-
ing during use.
Use only recommended replacement
parts available at an authorized service
station.
USE OF DAMAGED OR NON-
RECOMMENDED PARTS COULD RESULT
IN A SEVERE PERSONAL INJURY
AND/OR DAMAGE TO THE BLENDER.
See next page for proper container as-
sembly in user instructions.
NEVER IMMERSE THE MOTOR BASE IN
WATER. Unplug unit. The housing can
be cleaned with a damp cloth.
The motor is permanently lubricated
and does not require any additional lu-
brication.
ANY SERVICING SHOULD BE PER-
FORMED BY AN AUTHORIZED SERVICE
FACILITY.
KNOW YOUR BLENDER
CAUTION: Follow these important
steps to assemble, tighten, and
mount blender container quickly
and correctly. INJURY MAY RESULT
IF MOVING BLADES ARE ACCI-
DENTALLY EXPOSED.
ASSEMBLY OF CONTAINER
1. Turn container upside down so the
small opening is at the top.
2. Place sealing ring on container open-
ing.
3. Turn the agitator blades upside down
and place in mouth of container.
4. Thread container bottom to container.
Engage threads properly. Screw on firm-
ly.
ASSEMBLY OF MILL
Turn mill upside down, and remove
blade base.
Place ingredients in. Make sure the cor-
rect packing is placed properly.
Tightly screw the correct blade base
onto container.
Приєднуйтесь до розмови про цей продукт
Тут ви можете поділитися своєю думкою про Saturn ST-FP0055 Блендер. Якщо у вас є питання, спочатку уважно прочитайте інструкцію. Запит на інструкцію можна зробити за допомогою нашої контактної форми.