Посібник Black and Decker KS495 Лобзик

Посібник

4

ENGLISH

Intended use

Your Black & Decker jigsaw has been designed for

sawing wood, plastics and sheet metal. This tool is

intended for consumer use only.

Safety instructions

General power tool safety warnings

Warning! Read all safety warnings

and all instructions. Failure to follow all

instructions may result in electric shock,

fi re and/or serious injury.

Save all warnings and instructions for future

reference. The term "power tool" in all of the

warnings listed below refers to your mains

operated (corded) power tool or battery operated

(cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered

and dark areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of

fl ammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or

fumes.

c. Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodifi ed plugs

and matching outlets will reduce risk of electric

shock.

b. Avoid body contact with earthed or

grounded surfaces such as pipes, radiators,

ranges and refrigerators. There is an

increased risk of electric shock if your body is

earthed or grounded.

c. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat, oil,

sharp edges or moving parts. Damaged or

entangled cords increase the risk of electric

shock.

e. When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces

the risk of electric shock.

f. If operating a power tool in a damp location

is unavoidable, use a Residual Current

Device (RCD) protected supply. Use of an

RCD reduces the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing

and use common sense when operating

a power tool. Do not use a power tool while

you are tired or under the infl uence of

drugs, alcohol or medication. A moment of

inattention while operating power tools may

result in serious personal injury.

b. Use personal protective equipment. Always

wear eye protection. Protective equipment

such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate

conditions will reduce personal injuries.

c. Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool.

Carrying power tools with your fi nger on the

switch or energising power tools that have the

switch on invites accidents.

d. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e. Do not overreach. Keep proper footing

and balance at all times. This enables

better control of the power tool in unexpected

situations.

f. Dress properly. Do not wear loose clothing

or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose

clothes, jewellery or long hair can be caught in

moving parts.

g. If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of these devices can reduce dust

related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

b. Do not use the power tool if the switch

does not turn it on and off. Any power tool

Рейтинг

Детальніше про цей посібник

Ми розуміємо, що добре мати паперовий посібник для вашого Black and Decker KS495 Лобзик. Ви завжди можете завантажити посібник з нашого сайту та роздрукувати самостійно. Якщо ви бажаєте отримати оригінальний посібник, радимо зв’язатися з Black and Decker. Вони можуть надати оригінальний посібник. Шукаєте інструкцію до свого Black and Decker KS495 Лобзик іншою мовою? Виберіть потрібну мову на нашій домашній сторінці та знайдіть номер моделі, щоб дізнатися, чи є вона у нас.

Технічні характеристики

Усі посібники для Black and Decker Лобзики
Більше посібників для Лобзики

Часті запитання про Black and Decker KS495 Лобзик

Наша служба підтримки шукає корисну інформацію про товар і відповідає на поширені запитання. Якщо ви знайдете неточність у наших запитаннях та відповідях, повідомте нас про це, скориставшись контактною формою.

Супутні товари

Посібник

Black and Decker BCS601 Лобзик

Посібник

Dexter 750JS3-100.5 Лобзик

Посібник

Fein ASt 638 Лобзик

Посібник

Skil 4581 CA Лобзик

Посібник

Bort BPS-800-Q Лобзик

Посібник

Skil 4180 AA Лобзик

Посібник

Skil 4530 AA Лобзик

Посібник

Bosch YOUseries Лобзик

Пов'язані категорії