Посібник EMOS E0113 Будильник

Посібник

3

E0113 105 × 148,5 mm

(in a safe distance from sources of interference such as television sets or computer screens) the time signal is captured

within minutes. If the clock fails to catch the signal, proceed as follows:

1. Move the clock to a dierent place and try to nd the DCF signal again.

2. Check the distance of the clock from sources of interference such as computer screens or TV sets, as this distance should

be at least 1.5 to 2 meters. When searching for the DCF signal, do not place the alarm clock in the vicinity of metal doors,

window frames or other metal constructions or objects (washing machines, spin driers, refrigerators etc.)

3. In buildings with reinforced concrete (cellars, blocks of ats etc.) the DCF signal reception may be worse, depending

from local situation. In extreme case you will need to place the alarm clock near a window facing the transmitter.

DCF 77 radio signal reception is aected by the following factors.

• Thick windows and insulation, basement and cellars

• Unsuitable local geography (dicult to predict)

• Atmospheric disturbances, storms

• Electric appliances not suciently insulated

• Televisions and computers near the DCF receiver

Temperature unit setting

Push the DOWN button to toggle temperature units °C or °F.

Alarm clock setting

1. Hold the ALARM button.

2. Use the UP/DOWN buttons to set the required waking time.

You can navigate the menu by short pushes of the ALARM button.

3. After setting the waking time, push the ALARM button and a bell icon will be displayed to indicate that the alarm

is active.

4. Another push of the button will deactivate the alarm and the bell icon will not be on display.

Snooze and backlighting (SNOOZE/LIGHT)

• When the alarm clock is ringing, push SNOOZE/LIGHT to postpone the ringing by 5 minutes, the alarm icon will

start ashing.

• Push any other button except SNOOZE/LIGHT to turn o the SNOOZE function. The alarm will sound the next day.

• Push SNOOZE/LIGHT to activate backlighting of the display. The backlighting lasts for 5 seconds.

Troubleshooting

If the clock does not show correct time or if the DCF signal reception icon is not shown, reset the clock by pushing

the RESET button.

Incorrect time or loss of synchronisation may occur due to electromagnetic interference.

Care and maintenance

The product is designed so that with proper use it can serve reliably for many years. There are several guidelines for

correct operation:

• Before you start using the product, read the user manual carefully.

• Do not put the product in direct sunlight, extreme cold or moisture and sudden temperature change. It would

lower the measurement accuracy.

• Do not put the product in locations prone to vibrations and shocks – it could damage the product.

• Do not put the product under excessive pressure, shocks, dust, high temperature or moisture – it might harm the

product functionality, deplete its energy, damage the batteries or deform the plastic components.

• Do not place any sources of open re, on the product, such as a burning candle.

• Do not put the product in places with insucient airow.

• Do not interfere with the internal electric circuits of the product.

• Clean with soft wet cloth. Do not use solvents or cleaning detergents – they might scratch the plastic elements

and damage the electric circuits.

• Do not submerge the product under water or other liquid.

• The product must not be subjected to dripping or splatter water. Do not submerge it under water or other liquids.

• If the product is damaged or malfunctioning, do not repair it on your own. Have it repaired in the shop, where

you bought it.

Рейтинг

Детальніше про цей посібник

Ми розуміємо, що добре мати паперовий посібник для вашого EMOS E0113 Будильник. Ви завжди можете завантажити посібник з нашого сайту та роздрукувати самостійно. Якщо ви бажаєте отримати оригінальний посібник, радимо зв’язатися з EMOS. Вони можуть надати оригінальний посібник. Шукаєте інструкцію до свого EMOS E0113 Будильник іншою мовою? Виберіть потрібну мову на нашій домашній сторінці та знайдіть номер моделі, щоб дізнатися, чи є вона у нас.

Технічні характеристики

Усі посібники для EMOS Будильники
Більше посібників для Будильники

Супутні товари

Посібник

Adler AD 1195B Будильник

Посібник

Camry CR 1150B Будильник

Посібник

Adler AD 1196B Будильник

Посібник

Camry CR 1150W Будильник

Посібник

Adler AD 1195W Будильник

Посібник

Adler AD 1189B Будильник

Посібник

Philips TADR402 Будильник

Посібник

Adler AD 1189W Будильник

Пов'язані категорії