Посібник Philips BRE225 Епілятор

Посібник

- Make sure your skin is clean, entirely dry and

free from grease. Do not use any cream before

you start epilating.

- The optimal hair length for easy epilation is

3-4mm. If the hairs are too short, wait until they

are longer or try to remove the hairs by

repeatedly moving the appliance across the

skin.

Using the appliance

Attaching and detaching heads

1 To attach a head, place it on the handle and

slide it sideways until it locks into place ('click')

(Fig. 4).

2 To detach a head, slide it sideways and lift it off

the handle (Fig. 5).

Attaching and detaching accessories

1 To attach an accessory (caps or combs), simply

snap it onto the head ('click') (Fig. 6).

2 To detach an accessory, grab its front and back

and pull it upwards off the head (Fig. 7).

Switching the appliance on and off

1 Insert the supply unit in the wall socket and

push the small plug into the appliance (Fig. 8).

Make sure you push the small plug completely

into the socket of the appliance. Once you have

plugged it in fully, you hear a click.

2 To switch on the appliance, push the on/off

slide to setting I or setting II (Fig. 9).

3 To switch off the appliance, push the on/off

slide to setting O.

The integrated light goes on automatically to give

you a better view while you use the epilating head

(Fig. 10).

Epilating, shaving and trimming

The appliance is only suitable for dry use. If you

want to use creams or body lotion, apply them

after you have used the appliance.

Slight skin irritation like red skin or red dots may

occur after epilation. This is normal. We advise you

to epilate before you go to bed at night, as any

redness or skin irritation usually disappears

overnight.

Note: The appliance can only be used with cord.

1 Place the appliance on the skin at a 90° angle

(Fig. 11).

2 When you use the appliance with other heads

and accessories than the epilating head, also

make sure that you place them on the skin at a

90° angle.

3 When you use the appliance on sensitive areas,

stretch the skin with your free hand. When you

use the appliance on your underarms, raise

your arm and put your hand on the back of your

head to stretch the skin (Fig. 12).

4 Move the appliance slowly against the direction

of hair growth (Fig. 3).

Note: If you move the appliance over your skin too

fast, you may not obtain a smooth result.

Note: If your hairs are longer than 3-4mm, pretrim

them for easier and more comfortable epilation.

Epilating head

You can use the epilating head to epilate your legs,

underarms and bikini line.

Massage cap

You can attach the massage cap onto the epilating

head to massage the skin and minimize the pulling

sensation of epilation during use.

Senstive area cap

You can attach the sensitive area cap onto the

epilating head for more comfortable epilation of

sensitive areas (e.g. the underarms and bikini line).

Shaving head

You can use the shaving head to shave your legs

and body.

Note: The appliance can be moved in two

directions, for easier shaving of underarms.

Note: Always check the foil before use. If it is

damaged in any way, replace the cutting unit right

away (see 'Replacement').

Comb for shaving head

You can attach the comb onto the shaving head to

trim hairs to a length of 4mm.

Trimming head

You can use the trimming head to trim hard-to-

reach areas in the bikini zone.

Place the trimming head flat onto the skin to trim

(Fig. 13). Place the trimming head perpendicularly

onto the skin for styling and shaping (Fig. 14).

Comb for trimming head

You can attach the comb onto the trimming head

to trim hairs in the bikini area to a length of 4mm

(Fig. 15).

Cleaning and storage

Keep the handle and the supply unit dry (Fig.

2).

1 Remove the head from the handle.

2 If the shaving head is supplied: Grab the two

trimmers of the cutting unit and pull the cutting

unit out of the shaving head (Fig. 16).

3 Use the cleaning brush to brush away any hairs

that have collected on the heads and

accessories (Fig. 17).

Do not clean the foil of the shaving head cutting

unit with the cleaning brush, to avoid damage

to the foil.

4 Rinse the heads, accessories and cutting unit

under the tap (Fig. 18). Shake them firmly to

remove water drops (Fig. 19).

5 Let all parts dry completely.

6 Place the cutting unit back into the shaving

head ('click').

Lubricate trimmer teeth and foil of the cutting

unit with a drop of sewing machine oil every six

months for optimal performance (Fig. 20).

Рейтинг

Детальніше про цей посібник

Ми розуміємо, що добре мати паперовий посібник для вашого Philips BRE225 Епілятор. Ви завжди можете завантажити посібник з нашого сайту та роздрукувати самостійно. Якщо ви бажаєте отримати оригінальний посібник, радимо зв’язатися з Philips. Вони можуть надати оригінальний посібник. Шукаєте інструкцію до свого Philips BRE225 Епілятор іншою мовою? Виберіть потрібну мову на нашій домашній сторінці та знайдіть номер моделі, щоб дізнатися, чи є вона у нас.

Технічні характеристики

Усі посібники для Philips Епілятори
Більше посібників для Епілятори

Часті запитання про Philips BRE225 Епілятор

Наша служба підтримки шукає корисну інформацію про товар і відповідає на поширені запитання. Якщо ви знайдете неточність у наших запитаннях та відповідях, повідомте нас про це, скориставшись контактною формою.

Супутні товари

Посібник

Philips HP6574 SatinPerfect Епілятор

Посібник

Philips HP6371 Епілятор

Посібник

Philips BRE235 Епілятор

Посібник

Philips BRE650 Satinelle Епілятор

Посібник

Philips BRE644 Satinelle Епілятор

Посібник

Philips HP6511 Епілятор

Посібник

Philips BRE265 Епілятор

Посібник

Philips HP6583 Епілятор

Пов'язані категорії